It is a By pass system with no moving parts. It can be easily installed on any engine without causing any alteration to the engine.

Engine oil pressure is utilized to supply oil to the bottom of this purifier. This pressure further helps the oil to travel all the way through it. The oil then goes back to the engine by its own gravity.

KLAROL can be installed on any internal combustion engine like a truck / bus / generator / earth moving equipment / fishing trawler / tractor or a locomotive.

KLAROL cleans oil in two stages using three different methods.

In the first stage oil enters the KLAROL depth filter to be cleaned by Absorbtion. All solid contaminants upto five microns are removed in this stage. The oil then passes at a controlled flow rate into the KLAROL evaporation chamber which is heated to ensure a dry airspace. Controlling the flow of oil through KLAROL ensures formation of thin oil film in the evaporation chamber. These conditions are ideal to evaporate moisture, lower oxidized molecules of oil, air & gases from the oil. Purified oil then goes back into the parent tank.

• Increase in oil drain interval by increasing engine oil life.
• Longer and better engine life.
• Reduced fuel consumption.
• Reduced particle emissions.
• Reduces global warming, ground water pollution, soil pollution and air pollution.

Five Years ago

The Loco and Loco Crane department of Tata Steel Ltd, Jamshedpur India used to change engine oil after every 300 hours and the engines were down for major overhauling after every 15,000 hours.