Home ›   Products > Turbine Oil Purification System > Permanent Installation

Permanent Installation

KLAROL Oil Purifying machines should be installed permanently on all turbines specially steam and hydro with high probability of water contamination.

Water and metal contamination act as catalyst to increase oxidation in turbine oils. This leads to formation of sludge and varnish which choke servo pencil filters and cause sticking of valves thereby resulting in turbine shut downs.
Studies by Timken bearing company reveal that even 100 ppm of water can decrease bearing life considerably.

Installing a KLAROL system permanently to continuously clean oil while it is in operation ensures that the oil is always free of water and metal contaminants. Continuous cleaning of the oil also ensures removal of the by products of oxidation which not only polymerise into sludge and varnish but with water and metal as catalyst further increase oxidation of the oil.

Installing KLAROL permanently on a turbine oil tank to continuously clean oil would help in maintaining the cleanliness level of oil at NAS 4 at all times.

KLAROL Oil Cleaning Systems should specially be permanently installed on oil tanks which supply oil to the turbine governing system. Continuous removal of sludge and varnish and reducing further generation of the same, by Klarol, would prevent choking of the servo pencil filters and sticking of valves thereby ensuring smooth turbine operation.